Experiencing persistent connection problems with your Wireguard VPN on a GL-iNet router, particularly after a day of smooth operation? You’re not alone. This issue has been reported by users, and both GL-iNet and KeepSolid support teams have acknowledged ongoing investigations into the matter. This article delves into the details of this frustrating problem and explores potential causes and temporary solutions.
The initial reports highlight a peculiar pattern: Wireguard connections seem to drop or fail to reconnect after approximately 24 hours. This necessitates manual reconfiguration of the Wireguard client on GL-iNet routers, disrupting consistent VPN service. One user reached out to both GL-iNet and KeepSolid, their VPN provider, to pinpoint the root cause.
GL-iNet’s technical support suggested a potential culprit residing in routing policy issues. They hypothesized that after a reboot, the device might struggle to synchronize time due to the VPN not immediately connecting, potentially blocking the NTP (Network Time Protocol). This time synchronization problem could then contribute to the Wireguard connection instability observed after a day. GL-iNet indicated they are actively addressing this in their upcoming 3.210 firmware update, suggesting a fix is on the horizon for users of their routers.
(Alt Text: GL-iNet router device, illustrating network hardware relevant to VPN connection troubleshooting.)
Meanwhile, KeepSolid’s technical support confirmed experiencing “temporary issues with Wireguard VPN configurations.” They assured users that their engineers are aware of the problem and are diligently working towards a resolution. As a temporary workaround, KeepSolid recommended utilizing alternative VPN protocols such as OpenVPN. This suggests the problem might be specific to Wireguard configurations within their service and how they interact with router clients over time.
(Alt Text: Email excerpt from KeepSolid Support acknowledging Wireguard VPN configuration issues and suggesting alternative protocols.)
While a definitive solution is pending, understanding these insights from both GL-iNet and KeepSolid provides valuable context. If you are encountering Wireguard connection problems on your GL-iNet router after a day, consider these points:
- Time Synchronization: The potential link to time synchronization highlighted by GL-iNet could be a key factor.
- KeepSolid Configuration Issues: KeepSolid’s acknowledgement points towards a problem on their end with Wireguard configurations.
- Firmware Update: Keep an eye out for GL-iNet firmware version 3.210 or later, as it may contain a fix.
- Temporary Protocol Switch: Consider temporarily switching to OpenVPN as suggested by KeepSolid if consistent VPN access is crucial.
In conclusion, the “Wireguard Not Able To Connect Server After A Day” issue on GL-iNet routers appears to be a real and acknowledged problem. While investigations and fixes are underway, understanding the potential causes and temporary workarounds can help users manage their VPN connectivity in the interim. Stay tuned for updates from both GL-iNet and KeepSolid as they work towards a permanent solution.
